View OPIA404BTRE_2092602.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 1 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages description: the opia series optocouplers are designed for applic ations that use an analog ou tput (phototransistor or photodarlington) in a surface mount package. a wide select ion of configurations are available. with typical isolation voltage of 2,500 or 3,750 volts(rms), these produc ts meet typical power system isolation requirements. theory of operation: the led transmitter is used to i lluminate the photo sensor providing electrical isolation between two power systems while maintaining the ability to transmit information from one power system to the other. in many applications, analog signal levels ma y be required to be transmitted between two power systems while maintaining isolation between t he power systems up to 3,750 volts( rms). a variety of led and photo sensor configurations are available depending on the system requirements. the current transfer ratio (ctr) is determined us ing the output current and input current for analog photo sensors. ctr ratios can range from as low as 5 to over 9,000 depending on the device. all smd products are shipped in a shipping tube with ?tr? identified on the end of the part number. example: opi401atre is a 4-pin smd shipped in tape and reel (tr) features: ? 2,500 or 3,750 vrms electrical isolation ? choice of a single and dual led ? phototransistor or photo darlington sensor ? low-cost plastic dual-in-line (dip) package agency approvals: ? ul certification no: e58730 ? vde no: 40026577(opia401-404), 40026553(opia405-409) rohs applications: ? high voltage isolation: 2,500 or 3,750 volts(rms) ? pcboard power system isolation ? industrial equipment power isolation ? medical equipment power isolation ? office equipment 200 100 * 10 20 = = ? ? = ma ma current l ed current r photosenso ctr
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 2 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages part number pin # 1 2 3 4 opia401b a k e c opia402b a-k k-a e c opia403b a k e c opia404b a k e c opia405c a e c opia406c a k e c opia407c a-k k-a e c opia408c a k e c opia409c a k e c opia414b a k e c package style a (smd) package style b (sop) package style c (ssop) package outline dimensions and schematics: top-view
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 3 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages analog output devices ordering information part number isolation voltage max. (vrms) ctr min/typ/max typ. tr / tf (s) r l = 100 ohms package configuration opia401b 3,750 1,000 / - / - 100 / 20 4-pin sop a k?c e (dar) opia402b 3,750 20 / - 400 4 / 3 4-pin sop a k, k a?c e opia403b 3,750 600 / 1,600 / 7,500 60 / 53 4-pin sop a k?c e (dar) opia404b 3,750 50 / - / 600 5 / 4 4-pin sop a k?c e opia405cxxa 2,500 80 / - / 160 3 / 5 4-pin ssop a k?c e opia406c 2,500 200 / 2,000 / - 200 / 200 4-pin ssop a k?c e (dar) opia407cxxe 2,500 80 / - / 600 3 / 5 4-pin ssop a k, k a?c e opia408c 2,500 200 / 2,000 / - 200 / 200 4-pin ssop a k?c e (dar) opia409c 2,500 400 / 2,000 - 40 / 10 4-pin ssop a k?c e (dar) opia414b 3,750 100 / - / 600 4 / 3 4-pin sop a k?c e configuration: definition of terms led identification?sens or identification configuration information led a = anode k = cathode sensor b = base c = collector e = emitter (dar) = photodarlington packaging part number suffix: tu = shipped in tubes tr = tape & reel example: opia405ctu e opia405cxxb 2,500 130 / - / 260 3 / 5 4-pin ssop a k?c e opia405cxxc 2,500 200 / - / 400 3 / 5 4-pin ssop a k?c e opia405cxxd 2,500 300 / - / 600 3 / 5 4-pin ssop a k?c e opia405cxxe 2,500 50 / - / 600 3 / 5 4-pin ssop ak?ce
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 4 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages absolute maximum ratings (t a = 25 o c unless otherwise noted) storage temperature opia404, opia414 opia401, opia402, opia403 opia405, opia406, opia407, opia408, opia409 -55 c to +125 c -40c to +125 c -55c to +150 c operating temperature all except the part numbers noted below opia404 opia414 -30 c to +100 c -55 c to +115 c -30 c to +115 c isolation voltage (1 minute) opia400 opia401, opia402, opia403, opia404, opia414 opia405, opia406, opia407, opia408, opia409 5,000 vrms 3,750 vrms 2,500 vrms total package power dissipation opia401, opia402, opia403, opia404, opia414 opia405 opia406, opia407, opia408, opia409 170 mw 160 mw - lead soldering temperature (1/16? (1.6 mm) from case for 5 seconds with soldering iron) 260 c input diode continuous forward current all except the part number noted below opia414 50 ma 10 ma peak forward current (1 s pulse width, 300 pps) all except the part number noted below opia414 1 a 200 ma reverse voltage opia401, opia403, opia404, opia 405, opia406, opia409, opia414 opia402, opia407, opia408, opia409, opia410, opia412 6 v - power dissipation opia401, opia402, opia403, opia404 opia405, opia406, opia407, opia408, opia409 opia414 70 mw 60 mw 15 mw output phototransistor collector-emitter voltage opia402, opia404 opia401, opia409 opia403 opia406, opia408 opia405, opia407, opia414 60 v 300 v 35 v 40 v 80 v emitter-collector voltage opia405, opia406, opia407, opia408 opia401 opia402, opia403, opia404 opia409 opia414 6 v 0.1 v 5 v 0.3 v 7 v collector current opia402, opia404, opia405, opia407, opia414 opia401, opia403 opia406, opia408 opia409 50 ma 150 ma 90 ma 60 ma power dissipation all except the part numbers noted below opia405, opia406, opia407, opia408, opi409 150 mw 120 mw
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 5 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages electrical characteristics symbol parameter min typ max units test conditions input diode v f forward voltage all except those noted below opia404 opia405, opia406, opia407, opia408 opia401, opia409, opia414 - - - - 1.2 1.6 1.1 1.2 1.4 1.75 1.4 1.4 v i f = 20 ma i f = 10 ma i f = 5 ma i f = 10 ma i v fm peek forward voltage opia403 opia405 opi401, opia404, opia414, opia406, opia407, opia408, opia409 - - - - - - 3.5 3.0 - v i fm = 500 ma i r reverse current all except those noted below opia404, opia407, opia408, opia414 opia405, opia406, opia409 - - - - - - 10 - 5 a v r = 4 v - v r = 5 v c t terminal capacitance all except those noted below opia402, opia404, opia414 opia408, opia409 - - - 30 30 60 - 250 - pf v = 0.0 v, f = 1k hz v = 0.0 v, f = 1k hz v = 0.0 v, f = 1m hz output phototransistor i ceo collector dark current opia400, opia402, opia404 opia405, opia407 opia414 - - - - - - 100 100 100 na i f = 0 ma, v ce = 20 v i f = 0 ma, v ce = 80 v i f = 0 ma, v ce = 50 v v ce(sat) collector-emitter saturation voltage opia405, opia407 opia402, opia404, opia410 opia414 - - - 0.1 0.1 0.1 0.3 0.3 0.2 v i f = 10 ma, i c = 2 ma i f = 20 ma, i c = 1 ma i f = 10 ma, i c = 1 ma f c cutt-off frequency all except those noted below - - - k hz v cc = 5 v, i c = 2 ma, r l = 100 t r rise time opia402, opia414 opia405, opia407 opia404 - - - 4 3 5 18 18 20 s v cc = 2 v, i c = 2 ma, r l = 100 v cc = 5 v, i c = 2 ma, r l = 100 v cc = 2 v, i c = 2 ma, r l = 100 t f fall time opia402, opia414 opia405, opia407 opia404 - - - 3 5 4 18 18 20 s v cc = 2 v, i c = 2 ma, r l = 100 v cc = 5 v, i c = 2 ma, r l = 100 v cc = 2 v, i c = 2 ma, r l = 100 continued on next page
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 6 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages electrical characteristics (opia400 series) - continued from previous page symbol parameter min typ max units test conditions output photodarlington i ceo collector dark current opia401 opia403 opia406, opia408 opia409 - - - - - - - - 1.0 1.0 0.4 0.4 a i f = 0 ma, v ce = 200 v i f = 0 ma, v ce = 10 v i f = 0 ma, v ce = 40 v i f = 0 ma, v ce = 300 v v ce(sat) collector-emitter sa turation voltage opia403 opia406, opia408, opia409 opia401 - - - - - 0.8 1.0 1.0 1.5 v i f = 20 ma, i c = 1 ma i f = 1 ma, i c = 2 ma i f = 20 ma, i c = 100 ma f c cut-off frequency opia401, opia406, opia408, opia409 opia403 - 1.0 - 7.0 - - k hz - v cc = 5 v, i c = 2 ma, r l = 100 t r rise time opia401 opia403 opia406, opia408 opia409 - - - - 100 60 200 40 300 300 - - s v cc = 2 v, i c = 20 ma, r l = 100 v cc = 2 v, i c = 2 ma, r l = 100 v cc = 5 v, i c = 2 ma, r l = 100 v cc = 5 v, i c = 10 ma, r l = 100 t f fall time opia401 opia403 opia406, opia408 opia409 - - - - 20 53 200 10 100 250 - - s v cc = 2 v, i c = 20 ma, r l = 100 v cc = 2 v, i c = 2 ma, r l = 100 v cc = 5 v, i c = 2 ma, r l = 100 v cc = 5 v, i c = 10 ma, r l = 100 coupled characteristics ctr current transfer ratio opia404 opia401 opia402 opia403 opia405(see table, page 3) opia406, opia408 opia407 opia409 opia414 50 1,000 20 600 50 20 0.3 400 100 - - - - - 2,000 1.0 2,000 - 600 - 400 7,500 600 - 3.0 - 600 % i f = 5.00 ma, v ce = 5.0 v i f = 1.00 ma, v ce = 2.0 v i f = 1.00 ma, v ce = 5.0 v i f = 1.00 ma, v ce = 2.0 v i f = 5.00 ma, v ce = 5.0 v i f = 1.00 ma, v ce = 2.0 v i f = 5.00 ma, v ce = 5.0 v i f = 1.00 ma, v ce = 2.0 v i f = 1.00 ma, v ce = 5.0 v c f floating capacitance opia405, opia406, opia407, opia408, opia409 - - 0.6 0.4 1.0 - pf v = 0.0 v, f = 1m hz r iso isolation resistance 5x10 10 10 11 - ohm c500v, 40% to 60%rh
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 7 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages opia401
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 8 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages opia401 forward current?i f (ma)
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 9 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages opia402
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 10 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages opia402
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 11 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages opia403
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 12 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages opia403 forward current?i f (ma)
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 13 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages opia404
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 14 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages opia404
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 15 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages opia405
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 16 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages opia405
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 17 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages opia406
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 18 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages opia406 forward current?i f (ma)
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 19 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages opia407
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 20 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages opia407
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 21 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages opia408
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 22 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages opia408 forward current?i f (ma)
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 23 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages opia409
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 24 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages opia409
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 25 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages opia414
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 26 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages opia414
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 27 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages quality / reliability requirements note: this is to be performed when a change occurs to form, fit or function. government and industry standard compliance requirements european union?s reduction of hazardous substances (rohs) directive 2002/95/ec parameter failure criteria conditions htrb d i c(off) 10% 11 samples after 500hrs 0 fail @ vce = 5.0vdc, ta = 70c htfb d i c(on) 10% 50 samples after 96hrs 0 fail @ max p d , ta = 25c mttf @ 90% confidence 150, 000 min. @ 25c, 25madc moisture sensitivity level msl 1 per jdec stnd j-std-020b lead solderability 0 fail per method 208 of mil-std-202. glass transition of body 125 c min. dsc test method temperature humidity-bias 20% 85c, 85%rh, 500hrs, 80% min iceo temperature cycle 20% per method 1010.7 of mil-std-883e high temperature storage 20% 85c, 500hrs autoclave 0 fail t a = 121c, pressure = 15psi, humidity = 100%, time = 96hrs label identification description: size: 3? (7.4 cm) x 2.2? (5.5 cm) lettering shall be black on white background. format shall be as: notes: 1. the date code is a 4-digit code for date of manufacture where yy is the last two digits of the year, and ww is week number of manufacture. 2. the lot i.d. is the manufacturing location lot identification where y is the year of manufacture, nnnn is a sequential lot identifier, and ddd is the day of the year of manufacture. ? or use equivalent label format. carrollton, tx, usa made in taiwan optek p/n __opia407c-tr__ ii ii iii i iii ii iiii ii i i qty. ________n/a_________ ii ii iii i iii ii iiii ii i i date code _____(yyww) ___ ii ii iii i iii ii iiii ii i i lot i.d. ____(y-nnnnddd) __ ii ii iii i iii ii iiii ii i i
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 28 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages tube packaging information: optek's optocoupler part numbers packaging quantities tube inner small carton medium carton large carton qty weight 52 x 7 x 7.5 cm 53.5 x 16 x 17.5 cm 53.5 x 30.7 x 17.5 cm 53.5 x 30.7 x 25 cm qty weight qty weight gross weight qty weight gross weight qty weight gross weig ht p/h and smd 4-pin opia400d/a 100 44 3,000 1.40 12,000 6.0 6.5 24,000 12.0 12.5 36,000 18.0 18.5 6-pin opia6xxd/a series 65 44 1,950 1.50 7,800 6.5 7.0 15,600 12.0 12.5 23,400 18.5 19.0 8-pin opia8xxd series and opid804d 48 44 1,440 1.44 5,760 6.0 6.5 11,520 12.0 12.5 17,290 18.0 18.5 m/f sop 4-pin and 5-pin opia401b - opia404b, opia414b, opia500b 100 24 6,000 1.60 24,000 6.5 7.0 48,000 13.0 13.5 72,000 19.5 20.0 ssop 4-pin opia405c - opia409c 170 -- 10,200 -- p/h = pin-hole packages (referred as d = dual-in-line package) smd = standard surface mount packages (referred as a = 6.5mil smd) m/f or sop = mini-flat packages or small outside package s (referred as b = 4.40mil smd w/ 2.54mil lead- spacing) ssop = shrink sop packages (referred as c = 3.60mil smd with 1.27mil lead-spacing)
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 29 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages tube packaging specifications?smd? (tu): quantity: 4-pin (smd): 100pcs/tube dimensions are in: inches [millimeters] tolerance: 0.008 inches [ 0.2 millimeters] tube packaging specifications? sop (mini-flats) and ssop? (tu): quantity: 4-pin (sop): 100pcs/tube 4-pin (ssop): 170pcs/tube
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 30 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages tape and reel packaging specif ications? smd and sop?(tr): quantity: 4-pin (smd): 1000pcs/reel 4-pin (sop): 1000pcs/reel 4-pin (ssop): 3000pcs/reel dimensions are in: inches [millimeters] tolerance: 0.008 inches [ 0.2 millimeters] tape feeder: direction: reel:
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 9/2010 page 31 of 31 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opia401 through opia409, opia414 smd, sop and ssop packages tape and reel packaging specifications? ssop?(tr): quantity: 4-pin (ssop): 2000pcs/reel ?.0590.004 [?1.500.05] .1570.008 [4.00.02 ] .0780.008 [2.00.02] 0.0680.008 [1.75 0.02] 0.0880.008 [2.25 0.02] .1570.008] [4.00.02] .1000.008 [2.550.02] 0.2850.008 [7.25 0.02] ?.0590.004 [?1.500.05] 0.4720.008 [12.0 0.02] ?.5310.02 [?13.50.5] ?.0980.02 [2.50.5] ?.8260.04 [?211.0] ?7.000.04 [?1781.0] 2.360.04 [601.0] .5110.04 [130.5] .6290.04 [16.00.5] direction: reel: dimensions are in: inches [millimeters] tolerance: 0.008 inches [ 0.2 millimeters]

▲Up To Search▲

Price & Availability of OPIA404BTRE

	To Download OPIA404BTRE Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .